Table Of Contents
6.2.19 I/Q Path 2071
6.2.20 Reference Z 2073
6.2.21 I/Q Setup 2073
6.2.21.1 I Setup 2073
Differential 2073
Input Z 2074
Skew 2075
Combined Differential/Input Z (Remote Command Only) 2076
6.2.21.2 I Probe 2076
Attenuation 2077
Offset 2078
Coupling 2078
Clear Calibration 2079
6.2.21.3 Calibrate 2079
I/Q Isolation Calibration 2080
I/Q Isolation Calibration Time (Remote Query Only) 2081
I Port 2081
I Port Probe Calibration Time (Remote Query Only) 2081
I-bar Port 2082
I-bar Port Probe Calibration Time (Remote Query Only) 2082
6.2.21.4 Q Setup 2082
Q Same as I 2082
Differential 2083
Input Z 2084
Skew 2085
6.2.21.5 Q Probe 2085
Attenuation 2085
Offset 2086
Coupling 2086
Clear Calibration 2087
6.2.21.6 Calibrate 2087
Q Port 2088
Q Port Probe Calibration Time (Remote Query Only) 2088
Q-bar Port 2088
Q-bar Probe Calibration Time (Remote Query Only) 2089
6.2.22 I/Q Cable Calibrate 2089
6.2.22.1 I Port 2090
6.2.22.2 I-bar Port 2090
6.2.22.3 Q Port 2091
6.2.22.4 Q-bar Port 2091
6.2.22.5 I/Q Cable Calibration Time (Remote Query Only) 2092
Short Range Comms & IoT Mode User's &Programmer's Reference 63
To Next Page
Loading...
