Command Reference
DANalyse Subsystem
94
Y Scale Reference Value
DANalyse:AM|FM:VIEW:Y:RVALue <value>
DANalyse:AM|FM:VIEW:Y:RVALue?
Specifies the reference value of the Y scale.
Key access:
> AM/FM Modulation Analysis > Y Scale > Ref Value
Y Scale Reference Value
DANalyse:AM|FM:VIEW:Y:PDIVision <value>
DANalyse:AM|FM:VIEW:Y:PDIVision?
Specifies the time for every division of Y scale.
Key access:
> AM/FM Modulation Analysis > Y Scale > Scale/Division
Y Scale Reference Position
DANalyse:AM|FM:VIEW:Y:RPOSition TOP|CENTer|BOTTom
DANalyse:AM|FM:VIEW:Y:RPOSition?
Sets the reference position of the Y scale.
Key access:
> AM/FM Modulation Analysis > Y Scale > Ref Position
Y Scale Auto
DANalyse:AM|FM:VIEW:Y:AUTO
Triggers a sweep and sets the Y scale according to the test result
automatically.
Key access:
> AM/FM Modulation Analysis > Y Scale > Auto Scale
External Gain
DANalyse:AM|FM:VIEW:Y:EXTGain <value>
DANalyse:AM|FM:VIEW:Y:EXTGain?
Sets the External Gain for the carrier power measurement.
Key access:
> FM Modulation Analysis > Y Scale > Ext Gain
To Next Page
Loading...
