151
Command Reference
SENSe Subsystem
Input Port Attenuator Auto
[:SENSe]:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
[:SENSe]:POWer[:RF]:ATTenuation:AUTO?
Select the input port attenuator range to be set either
automatically (On) by the Reference Level Setting or manually
(Off).
*RST: On
Key access: > Attenuation
Attenuation Limit
[:SENSe]:POWer[:RF]:ATTLimit:STATe OFF|ON|0|1
[:SENSe]:POWer[:RF]:ATTLimit:STATe?
Toggles the attenuation limit function between On and Off.
*RST: On
Key access: > More > Att Limit
Input Port Power Gain
[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Turns the internal preamp on or off.
*RST: Off
Remarks: This command is only available with Option PA3 installed.
Key access: >
Int Preamp On Off
To Next Page
Loading...
