Table Of Contents
Power Integration Method 1015
Spur Avoidance 1015
Meas Setup Summary Table 1016
Auto Couple 1016
Meas Preset 1018
Max Hold (Remote Command Only) 1018
3.6.8.2 Limits 1019
Limit 1019
Limit Test 1020
Bandwidth 1020
3.6.8.3 Advanced 1021
Noise Floor Extension 1021
IF Gain 1026
3.6.8.4 Global 1027
Global Center Freq 1027
Global EMC Std 1028
Restore Defaults 1028
3.6.9 Sweep 1029
3.6.9.1 Sweep/Control 1029
Sweep Time 1029
Minimum Acquisition Time 1031
Sweep/Measure 1032
Restart 1034
Pause/Resume 1037
Abort (Remote Command Only) 1037
Sweep Time Annotation (Remote Query Only) 1038
3.6.9.2 Sweep Config 1038
Sweep Time Rules 1038
Points 1039
IF Dithering 1040
Image Protection 1040
3.6.10 Trace 1041
3.6.10.1 Select Trace 1047
3.6.10.2 Trace Control 1047
Trace Type 1048
Clear and Write | Restart Averaging | Restart Max/Min Hold 1053
View/Blank 1053
3.6.10.3 Math 1056
Math Function 1056
Operand 1 / Operand 2 1062
Offset 1063
Reference 1063
3.6.10.4 Detector 1063
Vector Modulation Analyzer Mode User's &Programmer's Reference 31
To Next Page
Loading...
