Keysight x-series - Page 52

Table Of Contents
Delete All User Views 1809
View Editor Remote Commands 1809
View Listing Query 1810
User View Listing Query 1810
3.11.5.3 Annotation 1810
Graticule 1810
Screen Annotation 1811
Trace Annotation 1811
Control Annotation 1812
Meas Bar 1812
Display Enable (Remote Command Only) 1812
3.11.6 Frequency 1814
3.11.6.1 Settings 1814
Center Frequency 1814
CF Step 1819
Freq Offset 1820
3.11.7 Marker 1821
3.11.8 Meas Setup 1821
3.11.8.1 Settings 1821
Segments 1821
Total Meas Time 1822
Meas Interval 1822
Meas Offset 1822
Meas Transient 1823
Measure Frequency Error 1823
Frequency Error 1823
Frequency Error Measurement Time 1824
Segment Frequency Error Correction 1824
Sync Type (Models with Multiple Receivers only) 1825
Auto Couple 1825
Meas Preset 1827
3.11.8.2 Advanced 1827
IF Gain 1827
3.11.8.3 Global 1828
Global Center Freq 1828
Global EMC Std 1829
Restore Defaults 1829
3.11.9 Sweep 1830
3.11.9.1 Sweep/Control 1830
Sweep/Measure 1830
Restart 1832
Pause/Resume 1834
Abort (Remote Command Only) 1835
52 Vector Modulation Analyzer Mode User's &Programmer's Reference