Table Of Contents
4.11.1 List installed Options (Remote Query Only) 1985
4.11.2 Lock the Front-panel keys (Remote Command Only) 1986
4.11.3 Lock Workstation (Remote Command Only) 1986
4.11.4 List SCPI Commands (Remote Query Only) 1988
4.11.5 Front Panel activity history (Remote Query only) 1988
4.11.6 SCPI activity history (Remote Query only) 1989
4.11.7 Instrument start time (Remote Query only) 1989
4.11.8 SCPI Version Query (Remote Query Only) 1990
4.11.9 Date (Remote Command Only) 1990
4.11.10 Time (Remote Command Only) 1990
4.11.11 Input Overload Enable (Remote Command Only) 1991
4.11.12 Power Up (Remote Query Only) 1991
5 Preset 1992
5.1 Preset Dropdown 1995
5.2 Mode Preset 1996
5.3 Restore Mode Defaults 1998
5.4 Input/Output Preset 1999
5.5 Full Mode Preset 2000
5.6 User Preset 2001
5.7 Save User Preset 2003
5.8 User Preset All Modes 2004
5.9 Restore Defaults All Modes 2005
5.10 User Preset All Screens 2006
5.11 Save User Preset All Screens 2007
5.12 Restore Screen Defaults 2008
5.13 Preset Type (Remote Command Only) 2009
5.14 Restart Instrument (Shutdown) 2010
5.15 Restart Application (Application Shutdown) 2011
5.16 System Log Off (Remote Command Only) 2012
5.17 Power Standby (Instrument Shutdown) 2013
6 Input/Output 2014
6.1 RF Source 2015
6.1.1 RF Output 2015
Vector Modulation Analyzer Mode User's &Programmer's Reference 59
To Next Page
Loading...
