Keysight x-series - Page 60

Table Of Contents
6.1.2 RF Output Port 2015
6.1.3 Half Duplex Output Port 2017
6.1.4 RF Power 2018
6.1.5 T/R Port High Power Attenuator 2018
6.1.6 Amplitude Setup 2018
6.1.6.1 RF Power 2018
6.1.6.2 Set Reference Power 2022
6.1.6.3 Power Ref 2023
6.1.6.4 Power Unit 2023
6.1.6.5 Amptd Offset 2024
6.1.6.6 Amplitude Increment 2025
6.1.7 Frequency 2025
6.1.8 List Sequencer 2025
6.1.8.1 Sequencer 2026
6.1.8.2 Initiate Sequence 2026
6.1.8.3 Repetition 2027
6.1.8.4 Trig Out Type 2027
6.1.8.5 Select Data Marker 2027
6.1.8.6 Manual Trigger Now 2028
6.1.8.7 List Sequencer Setup 2028
Number of Steps 2028
Go To Step 2028
Insert Step Before 2029
Delete Step 2029
Clear List 2029
Step Trigger 2029
Transition Time 2030
Band 2031
Device 2035
Freq/Chan 2036
Power 2037
Waveform 2037
Waveform File 2038
Step Duration 2038
Duration Time 2039
Play Count 2040
Trig Out 2041
Step Configuration (Remote Command Only) 2041
Step Configuration of Step Trigger parameter list (Remote Command Only) 2043
60 Vector Modulation Analyzer Mode User's &Programmer's Reference