Keysight x-series - Page 61

Table Of Contents
Step Configuration of Transition Time parameter list (Remote Command Only) 2044
Step Configuration of Radio Band parameter list (Remote Command Only) 2044
Step Configuration of Radio Band Link parameter list (Remote Command Only) 2045
Step Configuration of Frequency/Channel Number parameter list (Remote Command
Only) 2046
Step Configuration of Power parameter list (Remote Command Only) 2046
Step Configuration of Waveform parameter list (Remote Command Only) 2047
Step Configuration of Step Duration parameter list (Remote Command Only) 2048
Step Configuration of Duration Time or Play Count parameter list (Remote Command
Only) 2048
Step Configuration of Output Trigger parameter list (Remote Command Only) 2049
Clear List (Remote Command Only) 2049
6.1.8.8 Remote Software Trigger (Remote command Only) 2050
6.1.8.9 Query List Sequence Initiation Armed Status (Remote Query
Only) 2050
6.1.9 Frequency Setup 2050
6.1.9.1 Frequency 2050
6.1.9.2 Channel 2053
6.1.9.3 Radio Setup 2057
Radio Standard/Radio Band 2058
Radio Band Link 2062
6.1.9.4 Set Reference Frequency 2062
6.1.9.5 Freq Reference 2063
6.1.9.6 Freq Offset 2064
6.1.9.7 Freq Increment 2065
6.1.9.8 Rx/Tx Coupling 2066
6.1.9.9 Rx/Tx Offset 2067
6.1.10 Modulation 2067
6.1.11 Modulation Setup 2068
6.1.11.1 AM 2068
6.1.11.2 AM Mod Depth 2068
6.1.11.3 AM Rate 2068
6.1.11.4 AM Rate Increment 2069
6.1.11.5 FM 2069
6.1.11.6 FM Deviation 2070
6.1.11.7 FM Rate 2070
6.1.11.8 FM Rate Increment 2070
6.1.11.9 PM 2071
Vector Modulation Analyzer Mode User's &Programmer's Reference 61