Keysight x-series - Page 50

Table Of Contents
Meas Bar 2004
Display Enable (Remote Command Only) 2004
3.13.6 Frequency 2006
3.13.6.1 Settings 2006
Center Frequency 2006
CF Step 2011
Freq Offset 2012
3.13.7 Marker 2013
3.13.8 Meas Setup 2013
3.13.8.1 Settings 2013
Segments 2013
Total Meas Time 2014
Meas Interval 2014
Meas Offset 2014
Meas Transient 2015
Measure Frequency Error 2015
Frequency Error 2015
Frequency Error Measurement Time 2016
Segment Frequency Error Correction 2016
Sync Type (Models with Multiple Receivers only) 2016
Auto Couple 2017
Meas Preset 2019
3.13.8.2 Meas Standard 2019
Radio Standard Presets 2019
Enable Non-Std Meas 2033
3.13.8.3 Advanced 2033
IF Gain 2034
3.13.8.4 Global 2034
Global Center Freq 2034
Global EMC Std 2035
Global Limit Lines (Freq and Amptd) 2036
Extend Low Band 2036
Restore Defaults 2037
3.13.9 Sweep 2037
3.13.9.1 Sweep/Control 2037
Sweep/Measure 2037
Restart 2039
Pause/Resume 2042
Abort (Remote Command Only) 2042
3.13.10 Trace 2043
4 System 2044
4.1 System 2045
50 Spectrum Analyzer Mode User's &Programmer's Reference