Keysight x-series - Page 53

Table Of Contents
4.3.7.8 Numeric Entry Auto Open 2077
4.3.7.9 Touch On/Off 2078
4.3.7.10 Control Size 2078
4.3.7.11 Quick Save Mode 2078
4.3.7.12 Screen Tabs Left/Right 2079
4.3.7.13 Hide Screen Tabs in Full Screen 2080
4.3.7.14 2-Screen Orientation 2081
4.3.7.15 Clock Format 2082
4.3.7.16 Language 2083
4.3.7.17 Restore User Interface Defaults 2083
4.3.7.18 User Interface Type (Remote Query Only) 2084
4.4 Power On 2085
4.4.1 Power On State 2085
4.4.2 Power On Application 2087
4.4.3 FPGA Configuration 2087
4.4.3.1 FPGA Load Preference 2090
4.4.3.2 Load FPGA 2091
4.4.4 Restore Power On Defaults 2092
4.4.5 Configure Applications – Desktop application 2092
4.4.6 Configure Applications - Instrument boot-up 2095
4.4.7 Configure Applications - Remote Commands 2095
4.4.7.1 Configuration list (Remote Command Only) 2096
4.4.7.2 Configuration Memory Available (Remote Query Only) 2096
4.4.7.3 Configuration Memory Total (Remote Query Only) 2096
4.4.7.4 Configuration Memory Used (Remote Query Only) 2097
4.4.7.5 Configuration Application Memory (Remote Query Only) 2097
4.5 Restore Defaults 2098
4.5.1 Input/Output 2098
4.5.2 I/O Config 2099
4.5.3 User Interface 2099
4.5.4 Power On 2099
4.5.5 Alignments 2100
4.5.6 Misc 2100
Spectrum Analyzer Mode User's &Programmer's Reference 53