Notice:
1. For a good state,the instrument should be checked and adjusted by
responsible person especially After long time storage or transportation.
2. Before measuring,please conform instrument sunning properly.
3. After working,please clean the instrument and put it into cases.
4. Surface,buttons,screen etc. Are suitable cleaned by soft clean
clothes,Optical parts is better to use lens paper.Do not touch lens with
fingers.
5. During transportation,please keep instrument stay in case.If you are
going to move the instrument,put in into case firstly.
6. Storage the instrument in a dry room with constant temperature.
7. If the instrument need repair.Make sure it is checked & repaired by
technicians with well known of instrument construction or sent it back to
a professional dealer.
***Waring!!!
1.Never observe the sun through telescope system.
2. Be carefully when working around high voltage facilities.
3. Do not handle Staff in thunderstorms.
4. Pay attention to Spiked feet of tripod during transportation and
operation.
5. Survey should be operated in safety area and please obey local safety
rules & traffic rules.
To Next Page