2
2-13
Safety Units
Installation of crs secured by
the seatbelt
Front-facing Child Seat
Secure the child restraint with a seat belt as
shown in the figure.
Caution
y When installing a child restraint system,
follow the instructions provided by the
manufacturer.
Warning
Do not use the car seat unless the followings
are met.
The child seat may not perform as intended,
which may result in a serious injury.
y Make sure that the buckle of the seat belt is
securely engaged.
y Make sure that the seat belt is not loose or
twisted.
y Make sure that the base does not move
due to excessive play in all directions.
y You can’t adjust the angle of the backrest
with the child seat installed. If you’re trying
to do so, the seat belt will be slack, which
incurs danger. Always adjust the angle of
the backrest before installing the child seat.
Rear-facing Child Seat
Secure the child restraint with a seat belt as
shown in the figure.
Caution
y Never install a rear facing child restraint
on the front seat without ensuring that the
front airbag is deactivated. KG Mobility
Corporation recommends that a child
restraint to be installed on the rear seat.
When installing a child restraint, adjust the seat
back angle as desired.
Y461_OM_EN.indb 13 2023-04-28 오전 10:56:01
To Next Page
Loading...