EasyManua.ls Logo

Kia 2011 RIO - Capacities (Lubricants)

Kia 2011 RIO
290 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
48
Light Bulbs Capacities
Light Bulb 4 Door 5 Door
Headlights (Low/High) 55/60 55/60
Front turn signal lights/
28/8 28/8
Position lights
Side repeater lights
0.4 0.4
(if equipped)
Front fog lights (if equipped) 27 27
Front side mark light 8 8
Stop and tail lights 27/8 28/8
Rear turn signal lights 27 27
Back-up lights 18 18
High mounted stop light 18 18
License plate lights 5 5
Front map lamp 10 10
Center dome lamp 10 10
Trunk room (cargo area) lamp 5 5
Wattage
Lubricant Volume Classification
Engine oil
*1
3.5 US qt.
API service SM*
2
or above,
(with filter change) (3.3 l) ILSAC GF-4 or above
Manual transaxle fluid
2.0 US qt. API
service
GL-4
(1.9 l) SAE 75W-85 (fill-for-life)
Automatic transaxle 6.5 US qt.
fluid (6.1 l)
Power steering 0.8 US qt.
PSF-III
(if equipped) (0.8 l)
Coolant
5.8~6.1 US qt. Ethylene glycol base for
(5.5~5.8 l) aluminum radiator
Brake fluid
0.7~0.8 US qt.
FMVSS116 DOT-3
(0.7~0.8 l) or DOT-4
Fuel
11.9 US gal. Unleaded gasoline with
(45 l) AKI 87 or higher
*
1
Refer to the recommended SAE viscosity numbers on the page 7-46.
*
2
If the API service SM engine oil is not available in your country, you are able
to use API service SL.
DIAMOND ATF SP-III,
SK ATF SP-III,
or other brands meeting the
SP-III specification approved
by Kia Motors Corp.

Table of Contents

Related product manuals