Audio system
517
(Continued)
• Some iPod
®
devices, such as the
iPhone
®
, can be connected
through the Bluetooth
®
Wireless
Technology interface. The device
must have audio Bluetooth
®
Wireless Technology capability
(such as for stereo headphone
Bluetooth
®
Wireless Technology ).
The device can play, but it will not
be controlled by the audio system.
• To use iPod
®
features within the
audio mode, use the cable provid-
ed upon purchasing an iPod
®
device.
• Skipping or improper operation
may occur depending on the char-
acteristics of your iPod
®
/iPhone
®
device.
• If your iPhone
®
is connected to
both the Bluetooth
®
Wireless
Technology and USB, only iPod
®
mode will be supported during
Bluetooth
®
Audio Streaming. To
use Bluetooth
®
Audio Streaming,
disconnect iPod
®
cable with
iPhone
®
.
(Continued)
(Continued)
• When connecting iPod
®
with the
iPod
®
Power Cable, insert the con-
nector to the multimedia socket
completely. If not inserted com-
pletely, communications between
iPod
®
and audio may be interrupt-
ed.
• When adjusting the sound effects
of the iPod
®
and the audio system,
the sound effects of both devices
will overlap and might reduce or
distort the quality of the sound.
• Deactivate (turn off) the equalizer
function of an iPod
®
when adjust-
ing the audio system’s volume, and
turn off the equalizer of the audio
system when using the equalizer of
an iPod
®
.
• When not using iPod
®
with car
audio, detach the iPod
®
cable from
iPod
®
. Otherwise, iPod
®
may
remain in accessory mode, and
may not work properly.
• Use an iPod
®
/iPhone
®
USB cable
shorter than 1 meter in length,
longer cables cannot be recog-
nized.
To Next Page
Loading...
