783
Maintenance
7. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Install the service cover by putting it
into the service hole.
High mounted stop light replace-
ment
• 4 door
1. Turn off the engine
2. Open the trunk
3. Remove the socket from the assembly
by turning the socket counter clock-
wise until the tabs on the socket align
with the slots on the assembly.
4. Remove the bulb by pulling it straight
out.
5. Insert a new bulb in the socket.
6. Reinstall the socket in the assembly in
the reverse order of removal.
OUB075112
OUB075107K
To Next Page
Loading...
