23
5
5
Features of your vehicle Windows
The automatic reverse feature for
the window is only active when the
"auto up" feature is used by fully
pulling up the switch. The automatic
reverse feature will not operate if
the window is raised using the half
-
way position on the power window
switch.
Always check for obstructions
before raising any window to avoid
injuries or vehicle damage. If an
object less than 0.16 in (4 mm) in
diameter is caught between the
window glass and the upper window
channel, the automatic reverse win
-
dow may not detect the resistance
and will not stop and reverse direc
-
tion.
The automatic reverse feature
doesn't activate while resetting
power window system. Make sure
body parts or other objects are
safely out of the way before closing
the windows to avoid injuries.
Do not install any accessories in the
vehicle that extend into the open
window area. Such objects could
prevent the automatic reverse fea
-
ture from functioning.
Power window lock button
The driver can disable the power
window switches on the rear pas
-
sengers' doors by pressing the
power window lock switch to the
lock position (pressed).
When the power window lock switch
is pr
e
ssed:
䳜 Th
e driver's master control can
op
erate the front passenger's
power window and the rear pas
-
sengers' power windows.
䳜 The front passenger's control can
op
erate the front passenger's
power window.
䳜 The r
ear passengers' control can
-
not operate the rear passengers'
power window.
To Next Page
Loading...
