47
5
5
Features of your vehicle Instrument cluster
Instrument cluster control
The brightness of the instrument
panel illumination is changed by
pressing the illumination control
button ("+" or "-") when POWER
button is ON, or the taillights are
turned on.
䳜 If
you hold the illumination control
button ("+"
or "-"), the brightness
will be changed continuously.
䳜 If the brightness re
aches to the
maximum or minimum level, an
alarm will sound.
LCD display control
The LCD display modes can be
changed by using the control but
-
tons on the steering wheel.
Type A
Type B
1. : MODE button for change the
LCD MODES
2. / : MOVE scroll switch for
select the items
3. OK: SET/RESET button for set the
ite
ms or r
eset the items
* For the LCD modes, refer to "LCD
display" on page 5-53.
To Next Page
Loading...
