Features of your vehicle
945
Lighting
To flash the headlights:
䳜 Pull the lever towards you.
It w
ill return to the normal (low
beam)
position when released.
The headlight switch does not
need to be on to use this flashing
feature.
Operating turn signals and lane
change signals
The POWER button must be on for
the turn signals to function.
To turn on the turn signals:
䳜 Mov
e the lever up or down (A).
The
green arrow indicators on the
in
strument panel indicate which
turn signal is operating.
They will self-cancel after a turn
is c
omple
ted. If the indicator con
-
tinues to flash after a turn, man
-
ually return the lever to the OFF
position.
To signal a lane change:
䳜 Move the turn signal lever slightly
a
nd hold it in position (B).
The lever will return to the OFF
po
sition when released.
If an indicator stays on and does not
flash
or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace
-
ment.
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec
-
tion in the circuit.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
To Next Page
Loading...
