95
5
5
Features of your vehicle Lighting
The fog lights will turn on when the
fog light switch (1) is turned to the
on position after the headlight is
turned on.
To turn off the fog lights:
䳜 Turn the fog light switch (1) to
the OFF position
.
High Beam Assist (if equipped)
The High Beam Assist is a system
that automatically adjusts the
headlamp range (switches between
high beam and low beam) depending
to the brightness of detected vehi
-
cles and certain road conditions.
Operating High Beam Assist
The High Beam Assist can be oper
-
ated using the light switch.
1. Place the light switch in the AUTO
position
.
2. Turn on the high beam by pushing
the
lever away from you. The
High Beam Assist ( ) indicator
will illuminate.
The High Beam Assist will turn on
when
vehicle speed is above 25 mph
(40 km/h).
The details of operation with the
li
gh
t switch while the High Beam
Assist is on are below.
䳜 I
f the light switch is pushed away,
t
he High Beam Assist will turn off
and the high beam will be on.
䳜 If
the light switch is pulled
towa
rds you when the high beam
is off, the high beam will be on
without canceling the operation
of the High Beam Assist. (When
you hands off, the lever will move
to the middle and the high beam
will turn off.)
䳜 If
the light switch is pulled
towa
rds you when the high beam
is on by the High Beam Assist, the
low beam will be on and the High
Beam Assist will turn off.
䳜 I
f the light switch is turned to the
he
adlamp position ( ) from
AUTO position, the High Beam
Assist w
ill turn off and the low
beam will be on.
To Next Page
Loading...
