Features of your vehicle
965
Lighting
When the High Beam Assist is oper
-
ating, the high beam switches to
low beam in the following condi
-
tions.
䳜 When the headlamp is detected
fr
om the on-coming vehicle.
䳜 When the tail lamp is detected
from
the front vehicle.
䳜 When headlamp / tail lamp of
bi
cycle/motorcycle is detected.
䳜 When the surrounding is so bright
tha
t high beams are not needed.
䳜 When streetlights or
other lights
are detected.
䳜 When the light switch is not in the
AUT
O position.
䳜 When the High Beam Assist is off.
䳜 When vehicle speed is below 15
mph (24 km/h).
High Beam Assist warning light and
message
When the High Beam Assist System
is not working properly, a warning
message will come on for a few sec
-
ond.
After the message disappears, the
master
warning light ( ) will illu
-
minate. Take your vehicle to an
authorized Kia dealer and have the
system checked.
The High Beam Assist system may
not work properly in the following
situations:
䳜 When the light from a vehicle is
poor
- When the light from a vehicle is
not de
tected because of lamp
damage, or because it is hidden
from sight, etc.
- When the lamp of a vehicle is
c
o
vered with dust, snow or
water.
- When a vehicle's headlamps are
off but the fog la
mps
on and
etc.
䳜 Wh
en external conditions inter
-
vene
- When there is a lamp that has a
simila
r shape as a vehicle's
lamps.
- When the headlamp is not
r
e
paired or replaced at an
authorized dealer.
- When headlamp aiming is not
pr
op
erly adjusted.
- When driving on a narrow
curved road, rough roa
d, down
-
hill or uphill.
To Next Page
Loading...
