97
5
5
Features of your vehicle Lighting
- When only part of the vehicle in
front is visible on a crossroad or
curved road.
- When there is a traffic light,
reflecting sign, flashing sign or
mirror ahead.
- When there is a temporary
r
e
flector or flash ahead (con
-
struction area).
-When the road condi
tions are
bad such as being wet, iced or
covered with snow.
- When a vehicle suddenly
appe
ar
s from a curve.
- When the vehicle is tilted from
a flat ti
re or being towed.
䳜 When front visibility is poor
-
When the lamp of the on-com
-
ing or front vehicle is covered
with dust, snow or water.
- When the light from a vehicle is
not de
tected because of
exhaust fume, smoke, fog,
snow, etc.
- When the front window is cov
-
ered with foreign substance.
- When it is hard to see because
of fog, heavy rain
or snow and
etc.
䳜 Do not disassemble a front view
camera temporarily for tinted
window or attaching any types of
coatings and accessories. If you
disassemble the camera and
assemble it again, take your vehi
-
cle to an authorized Kia dealer
and have the system checked.
䳜 When you re
place or reinstall the
windshield glass, take your vehicle
to an authorized Kia dealer and
have the system checked.
䳜 Be car
eful that water doesn't get
into the Hig
h Beam Assist unit
and do not remove or damage
parts of the High Beam Assist
system.
䳜 Do not pla
ce
objects on the dash
board that reflect light such as
mirrors, white paper, etc. The
system may not be able to func
-
tion if sunlight is reflected.
䳜 At times, the High Beam Assist
may not operate due
to system
limitations. The system is for
your convenience only.
It is the responsibility of the driver
to dri
v
e safely and always check
the road conditions.
䳜 When the system does not oper
-
ate normally, change the lamp
position manually between the
high beam and low beam.
To Next Page
Loading...
