131
5
5
Features of your vehicle Interior features
䳜 Place the smart phone on the
center of the charge pad for best
results. The smart phone may not
charge when placed near the rim
of the charging pad. When the
smart phone does get charged, it
may heat up excessively.
䳜 For smart phones without built-in
wireless charging system, an
appropriate accessory has to be
equipped in order to use the vehi
-
cle's wireless charging system.
䳜 Smart phones of some manufac
-
turers may display messages on
weak current. This is due to the
particular characteristic of the
smart phone and does not imply a
malfunction on wireless charging
function.
䳜 The
indicator light of some manu
-
facturers' smart phones may still
be orange after the smart phone
is fully charged. This is due to the
particular characteristic of the
smart phone and not a malfunc
-
tion of the wireless charging.
䳜 When any smart phone without a
wir
eless charging function or a
metallic object is placed on the
charging pad, a small noise may
sound. This small sound is due to
the vehicle discerning compatibil
-
ity of the object placed on the
charging pad. It does not affect
your vehicle or the smart phone in
any way.
䳜 T
he wireless cellular phone
char
ging system may not support
certain cellular phones, which are
not verified for Qi specification( ).
䳜 Wh
en placing your cellular phone
on the
charging mat, position the
phone in the middle of the mat
for optimal charging performance.
If your cell phone is off to the
side, the charging rate may be
less and in some cases the cell
phone may experience higher
heat conduction.
䳜 Wh
en charging some cellular
phones with a self-protection
fe
ature, the wireless charging
speed may decrease and the
wireless charging may stop.
This device complies with part 15
of the FCC Rules
Operation is subject to the following
two conditions:
1. This device may not cause harm
-
ful interference, and
2. This device must accept any
inte
rference received, including
interference that may cause
undesired operation.
To Next Page
Loading...
