7
6
6
Driving your vehicle Power button
OFF (Not Illuminated)
To turn off the vehicle power (ON
position), press the POWER button
with the shifter dial in the P (Park)
position. When you press the
POWER button without the shifter
dial in the P (Park) position, the
POWER button will not change to
the OFF position but to the ACC
position.
ACC (Accessory) (Amber)
Press the POWER button while it is
in the OFF position without depress
-
ing the brake pedal.
If the POWER button is in the ACC
position for more than 1 hour
, the
button is turned off automatically
to prevent battery discharge.
ON (Red)
Press the POWER button while it is
in the ACC position without depress
-
ing the brake pedal.
The warning lights can be checked
before
the vehicle is started. Do not
leave the POWER button in the ON
position for a long time. The battery
may discharge, because the vehicle
is not ON.
START/RUN (Not Illuminated)
To start the vehicle, depress the
brake pedal and press the POWER
button with the shifter dial in the P
(Park) position. For your safety,
start the vehicle with the shifter dial
in the P (Park) position.
If you press the POWER button
without
depressing the brake pedal,
the vehicle will not start and the
POWER button changes as follow:
Go to OFF → ACC → ON → OFF or
ACC
If you leave the POWER button in
the ACC or ON position for a long
time, the battery will discharge.
Starting vehicle
Never press the POWER button
while the vehicle is in motion except
in an emergency. This would result
in loss of directional control and
braking function, which could cause
an accident.
Leaving the Vehicle
To avoid unexpected or sudden
vehicle movement, never leave your
vehicle if the reduction gear is not
locked in the P (Park) position and
the parking brake is fully engaged.
Before leaving the driver's seat,
always make sure the reduction
gear is engaged in P (Park), set the
parking brake fully and shut the
vehicle off.