Driving your vehicle
346
Brake system
Applying Auto Hold function
1. Depress the brake pedal, start the
vehicle and then press the Auto
Hold button. The white AUTO
HOLD indicator will come on indi
-
cating the system is in standby.
Before the Auto Hold will engage,
the driv
er's door and vehicle hood
must be closed and the liftgate
must be closed.
When coming to a complete stop by
de
pr
essing the brake pedal, the
AUTO HOLD indicator changes from
white to green indicating the AUTO
HOLD is engaged. The vehicle will
remain at a standstill even if you
release the brake pedal.
If EPB is applied, Auto Hold will be
re
l
eased.
If you press the accelerator pedal
with the
shifter dia
l in D (Drive) or
manual mode, the Auto Hold will be
released automatically and the vehi
-
cle will start to move. The indicator
changes from green to white indi
-
cating the Auto Hold is in standby
and the EPB is released.
When driving off from Auto Hold by
depr
essi
ng the accelerator pedal,
always check the surrounding area
near your vehicle.
Slowly depress the accelerator pedal
for a smoo
th launch.
Canceling Auto Hold function
䳜 To cancel the Auto Hold operation,
press the Auto Hold switch. The
AUTO HOLD indicator will go out.
䳜 T
o cancel the Auto Hold operation
w
hen the vehicle is at a standstill,
press the Auto Hold switch while
depressing the brake pedal.
To Next Page
Loading...
