Driving your vehicle
366
Brake system
Warning messages
The Auto Hold function will display a
warning message with sound under
certain conditions.
When the EPB is applied from Auto
H
o
ld, a warning will sound and a
message will appear.
When the conversion from Auto
Hold to EPB is not working properly
a w
a
rning will sound and a message
will appear.
When this message is displayed, the
Auto Hold and EPB may not operate.
For your safety, depress the brake
pedal.
If you do not apply the brake pedal
when you release the Auto Hold by
pressing the [AUTO HOLD] switch, a
warning will sound and a message
will appear.
When you press the
[AUTO HOLD]
switch, if the driver's door and vehi
-
cle hood are not closed or the lift
-
gate is not closed, a warning will
sound and a message will appear on
the LCD display.
To Next Page
Loading...
