Driving your vehicle
606
Smart Cruise Control with Stop & Go System
䳜 If the smart cruise control is left
on, (cruise indicator in the instru
-
ment cluster illuminated) the
smart cruise control can be acti
-
vated unintentionally. Keep the
smart cruise control system off
(cruise indicator off) when the
smart cruise control is not being
used.
䳜 Use the sm
art cruise c
ontrol sys
-
tem only when traveling on open
highways in good weather.
䳜 Do not use the smart cruise con
-
trol when it may not be safe to
keep the car at a constant speed.
For instance.
- Highway interchange and toll
-
gate
- Road surrounded by multiple
st
eel constructions (subway
construction, steel tunnel, etc)
-Parking lot
- Lanes beside guard rail on a
roa
d
-
Slippery road with rain, ice, or
sno
w
-Abrupt curved road
- Steep hills
-Windy roads
-Off roads
- Rods under construction
-Rumble strip
- When driving near crash barri
-
ers
- When driving on a sharp curve
- When the vehicle sensing ability
d
e
creases due to vehicle modi
-
fication resulting level differ
-
ence of the vehicle's front and
rear
- When driving in heavy traffic or
wh
en traffic conditions make it
difficult to drive at a constant
speed
- Limited visibility (rain, snow,
smog,
etc.)
䳜 Pay particular attention to the
dri
ving conditions whenever using
the smart cruise control system.
䳜 Be
careful when driving downhill
using the SCC.
䳜 Cruise function should not be
use
d when the vehicle is being
towed to prevent any damage.
䳜 Always set
t
he vehicle speed
under the speed limit in your
country.
䳜 Al
ways pay continuous attention
to r
oad and driving conditions
even when the smart cruise con
-
trol system is being operated.
Smart Cruise Control switch
The smart cruise control switch has
the following functions.
䳜 CANCEL: Cancels
cruise c
ontrol
operation.
䳜 CRUISE: Turns cruise c
ontrol sys
-
tem on or off.
䳜 RES+: Resumes or increases
cruis
e control speed.
To Next Page
Loading...
