Kia 2019 niro - Adjusting the Sensitivity of Smart Cruise Control

Driving your vehicle
706
Smart Cruise Control with Stop & Go System
CAUTION
䳜 Do not install accessories around
the sensor and do not replace the
bumper by yourself. It may inter
-
fere with the sensor perfor
-
mance.
䳜 Always keep the sensor and
bum
per clean.
䳜 Use only a s
oft cloth to wash the
v
ehicle. Do not spray pressurized
water directly on the sensor or
sensor cover.
䳜 Be
careful not to apply unneces
-
sary force on the radar sensor or
sensor cover. If the sensor is forc
-
ibly moved out of proper align
-
ment, the Smart Cruise Control
System may not operate cor
-
rectly. In this case, a warning
message may not be displayed.
Have the vehicle inspected by an
authorize
d
Kia dealer.
䳜 D
o not damage the sensor or sen
-
sor area by a strong impact. If the
sensor moves slightly off position,
the smart cruise control system
will not operate correctly without
any warning or indicator from the
cluster. If this occurs, take your
vehicle to an authorized Kia dealer
and have the system checked.
䳜 Use
only a genuine Kia sensor
c
over for your vehicle. Do not
paint anything on the sensor
cover.
䳜 If the
front bumper becomes
dama
ged in the area around the
radar sensor, the Smart Cruise
Control System may not operate
properly.
Adjusting the sensitivity of Smart
Cruise Control
The sensitivity of vehicle speed
when following the front vehicle to
maintain the set distance can be
adjusted.
䳜 Go to the 'User Settin
gs
→ Driver
Assistance → SCC Reaction' on
the LCD display.
You may select one of the three
stag
es
you prefer.
䳜 Sl
ow: Vehicle speed to the vehicle
ah
ead to maintain the set dis
-
tance is slower than normal
speed.
䳜 Normal: Vehicle speed to the vehi
-
cle ahead to maintain the set dis
-
tance is normal
䳜 Fast: Vehicle speed to the vehicle
ah
ead to maintain the set dis
-
tance is faster than normal speed.
NOTICE
The last selected mode remains in
the system.