Driving your vehicle
746
Smart Cruise Control with Stop & Go System
䳜 Vehicles with small rear profiles
such as trailers with no loads
A vehicle ahead cannot be recog
-
nized correctly by the sensor if any
of following occurs:
䳜 W
hen the vehicle is pointing
up
wards due to overloading in the
trunk (liftgate)
䳜 Wh
ile making turns by steering
䳜 When driving to one side of the
la
ne
䳜 When driving on narrow lanes or
on curv
es
Adjust your vehicle speed by
depre
ssing the brake pedal accord
-
ing to the road and driving condi
-
tions ahead.
When vehicles are at a standstill and
the
vehicle in front of you changes
to the next lane, be careful when
your vehicle starts to move because
it may not immediately recognize
the stopped vehicle in front of you.
In this case, you must maintain a
saf
e
braking distance, and if neces
-
sary, depress the brake pedal to
reduce your driving speed in order
to maintain a safe distance.
Always look out for pedestrians
when
your vehicle is maintaining a
distance with the vehicle ahead.
Always be cautious when approach
-
ing vehicles that are taller with
higher clearance, or vehicles carry
-
ing loads that stick out of the back
of the vehicle.
To Next Page
Loading...
