Driving your vehicle
926
Rear Cross-Traffic Collision Warning (RCCW)
If the system still does not operate
normally have your vehicle
inspected by an authorized Kia
dealer.
Turn off the BCW and RCCW system
when a trailer or carrier is installed.
䳜 Press the BCW switch (the indica
-
tor on the switch will turn off)
䳜 Deactivate the RCCW system by
deselecting 'User Se
ttings →
Driver Assistance → Rear Cross-
Traffic Collision Warning'
Check Blind-Spot Collision Warning
(BCW) system
If there is a problem with the BCW
system, a warning message will
appear and the light on the switch
will turn off. The system will turn
off automatically. RCCW will not
operate also if the BCW system
turns off due to malfunction. Have
your vehicle inspected by an autho
-
rized Kia dealer.
Limitations of the RCCW
The driver must be cautious in the
below situations, because the sys
-
tem may not detect other vehicles
or objects in certain circumstances.
䳜 Wh
en a trailer or carrier is
in
stalled.
䳜 The vehicle drives in inclement
we
ather such as heavy rain or
snow.
䳜 The sensor is c
ov
ered with rain,
snow, mud, etc.
䳜 The rear bumper where the sen
-
sor is located is covered with a
foreign object such as a bumper
sticker, a bumper guard, a bike
rack, etc.
䳜 Th
e rear bumper is damaged, or
the
sensor is out of the original
default position.
䳜 T
he vehicle height gets lower or
h
igher due to heavy loading in a
trunk, abnormal tire pressure, etc.
䳜 Wh
en the temperature of the
r
ear bumper is high.
䳜 When the sensors are blocked by
othe
r vehicles, walls or parking-
lot pillars.
䳜 T
he vehicle drives on a curved
roa
d.
䳜 The road pavement (or the
per
ipheral ground) abnormally
contains metallic components (i.e.
possibly due to subway construc
-
tion).
䳜 There is a fixed object near the
v
ehicle, such as a guardrail.
To Next Page
Loading...
