Driving your vehicle
1006
Driver Attention Warning (DAW)
The Driver Attention Warning sys
-
tem utilizes the camera sensor on
the front windshield for its opera
-
tion.
To keep the camera sensor in the
best condition
, you should observe
the followings:
䳜 Do not disassemble camera tem
-
porarily for tinted window or
attaching any types of coatings
and accessories. If you disassem
-
ble a camera and assemble it
again, take your vehicle to an
authorized Kia dealer and have
the system checked.
䳜 D
o not place any reflective objects
(i.e. white
paper, mirror) over the
dashboard. Any light reflection
may prevent the Driver Attention
Warning (DAW) system from
functioning properly.
䳜 P
ay extreme caution to keep the
ca
mera sensor dry.
䳜 Do not arbitrarily disassemble the
c
amera assembly, or apply any
impact on the camera assembly.
* Playing the vehicle audio system at
high volume may prevent occu
-
pants from hearing the Driver
Attention Warning system warn
-
ing sounds.
The Driver Attention Warning sys
-
tem may not provide alerts in the
following situations:
䳜 The lane detection performance is
li
mited. (For more information,
refer to "Lane Keeping Assist
(LKA) System (if eq
ui
pped)" on
page 6-106.)
䳜 The vehicle is erratically driven or
is a
bruptly turned for obstacle
avoidance (e.g. construction area,
other vehicles, fallen objects,
bumpy road).
䳜 F
orward drivability of the vehicle
i
s severely undermined (possibly
due to wide variation in tire pres
-
sures, uneven tire wear-out, toe-
in/toe-out alignment).
䳜 The vehicle drives on a curvy road.
䳜 The vehicle drives on a bumpy
roa
d.
䳜 The vehicle drives through a
w
indy area.
䳜 The vehicle is controlled by the
f
ollowing driver assistance sys
-
tems:
- Lane Keeping Assist (LKA) sys
-
tem
- Forward collision-avoidance
assist (FCA) S
ystem.
- Smart Cruise Control (SCC) Sys
-
tem
To Next Page
Loading...
