Kia 2019 niro - LKA Activation; LKA Operation

Driving your vehicle
1086
Lane Keeping Assist (LKA) System
LKA operation
To activate/deactivate the LKA, with
the POWER button in the ON posi
-
tion, take the following steps:
䳜 Press the LKA button located on
the
instrument panel on the lower
left hand side of the driver.
The indicator in the cluster display
w
i
ll initially illuminate white.
If the indicator (white) was acti
-
vated in the previous vehicle ON,
the system turns on automati
-
cally.
If you press the LKA button again,
the in
dicator on the cluster display
will go off.
The color of indicator will change
dep
e
nd on the condition of LKA.
䳜 White:
Sensor does not detect the
lane ma
rker or vehicle speed is
less than 40 mph (64 km/h).
䳜 Gr
een: Sensor detects the lane
mar
ker and system is able to con
-
trol the steering.
If the function is turned off in User
settings, the system
will not oper
-
ate. If you select LDW / LKA / Active
LKA in User settings, the selected
function will be activated.
LKA activation
To see the LKA screen on the LCD
display in the cluster, Tab to the
ASSIST mode ( ).
For further details, refer to "LCD
Display Modes" on page 5-54.
After LKA is activated, if both lane
ma
rk
ers are detected, vehicle speed
is over 40 mph (64 km/h) and all the
activation conditions are satisfied, a
green steering wheel indicator will
illuminate and the steering wheel
will be controlled.
WARNING
The Lane Keeping Assist system is a
system designed to help prevent the
driver from leaving the lane. How
-
ever, the driver should not solely
rely on the system but always check
the road conditions when driving.
ODEEV078119NR