Driving your vehicle
1126
Lane Keeping Assist (LKA) System
- The number of lanes increases/
decreases or the lane lines are
crossing (Driving through a toll
plaza / toll gate, merged/
divided lane).
- There are more than two lane
ma
rk
ers.
- The lane marker is very thick or
thin.
-
The lane marker is not visible
due to
snow, rain, stain, a pud
-
dle or other factors.
- A shadow is on the lane marker
beca
use of a median strip,
guardrail, noise barriers or
other objects.
- When the lane markers are
c
omplicated or a structur
e sub
-
stitutes for the lines such as a
construction area.
- There are crosswalk signs or
other sy
mbols on the road.
- The lane suddenly disapp
ears
such as at the intersection.
- The lane marker in a tunnel is
cov
ered with dirt or oil and etc.
䳜 When external conditions inter
-
vene
- The brightness of outside
chan
ges suddenly when enter
-
ing/exiting a tunnel or passing
under a bridge.
- The headlamps are not on at
night o
r in a tunnel, or light level
is low.
- There is a boundary structure
in the
roadway.
- The light of street, sun, oncom
-
ing vehicle and so on reflects
from the water on the road.
- When light shines brightly from
beh
ind the vehicle.
- The distance from the vehicle
ahead
is very short or the vehi
-
cle ahead covers up the lane
line.
- You drive on a steep grade or a
shar
p curve.
- The vehicle vibrates heavily.
- The temperature near the
r
earview
mirror is very high due
to direct sun light and etc.
䳜 Wh
en front visibility is poor
-
The lens or windshield is cov
-
ered by foreign materials.
- The sensor cannot detect the
lane
because of fog, heavy rain
or snow.
- The windshield is fogged by
hu
mi
d air in the vehicle.
- Putting something on the crash
pa
d and etc.
The Lane Keeping Assist system is a
system designed to help prevent the
driver from leaving the lane. How
-
ever, the driver should not solely
rely on the system but always take
the necessary actions for safe driv
-
ing practices.
To Next Page
Loading...
