Maintenance
308
Tires and wheels
The TIN can be used to identify the
tire in case of a recall.
1. Manufacturer or brand name
Manufacturer or Brand name is
shown.
2. Tire size designation
A tire's sidewall is marked with a tire
size designation. You will need this
information when selecting replace
-
ment tires for your vehicle. The fol
-
lowing explains what the letters and
numbers in the tire size designation
mean.
Example tire size designation:
(These numbers are provided as an
exa
m
ple only; your tire size desig
-
nator could vary depending on your
vehicle.)
P235/65R17 108T
䳜 P: Appl
icable vehicle type (tires
ma
rked with the prefix "P" are
intended for use on passenger
vehicles or light trucks; however,
not all tires have this marking).
䳜 235: Tir
e width in millimeters.
䳜 65: Aspect ratio. The tire's section
height as a per
centage of its
width.
䳜 R: T
ire construction code (Radial).
䳜 17: Rim diameter in inches.
䳜 108: Load Index, a
numerical code
associated with the maximum
load the tire can carry.
䳜 T
: Speed Rating Symbol. See the
spe
ed rating chart in this section
for additional information.
Wheel size designation
Wheels are also marked with
important information that you
need if you ever have to replace one.
The following explains what the let
-
ters and numbers in the wheel size
designation mean.
Example wheel size designation:
7.0JX17
䳜 7.0: Rim width in
i
nches.
䳜 J: Rim contour designation.
䳜 17: Rim diameter in inches.
To Next Page
Loading...
