EasyManua.ls Logo

Kia 2019 niro - Disconnecting the Portable Charging Cable (ICCB: In-Cable Control Box)

Kia 2019 niro
551 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electric Vehicle Guide
401
Charging Electric Vehicle (Trickle Charge)
Disconnecting the Portable
Charging Cable (ICCB: In-Cable Con
-
trol Box)
1. Hold the charging connector han
-
dle and pull it while pressing the
release button (1).
Before disconnecting the charging
co
nnector, make sure the vehicle's
doors are unlocked. When the
doors are unlocked, the charging
connector lock system will be
triggered. And the charging con
-
nector will not be disconnected.
However, in AUTO Mode, the lock
is re
leased automatically when
charging is completed, and you
can disconnect the charging con
-
nector.
For more information, refer to the
"Charging Connector Lock" on
page 1-17.
CAUTION
In order to disconnect the charging
connector, release the vehicle's
doors to unlatch the charging con
-
nector lock system.
If not, the charging connector and
the
vehicle's charging inlet may be
damaged.
CAUTION
When disconnecting the charging
connector, do not try to disconnect
it by force while not pressing the
release button. This may damage
the charging connector and vehicle
charging inlet.
If the charging connector lock
does not unlatch even after the
vehicle's doors are unlocked, use
the emergency release lever in
the motor room and press the
charging connector lock release
button (1) to disconnect the
charging connector. If such case
occurs, the charging connector
lock function may be defective so
have your vehicle inspected by an
authorized Kia dealer.
ODEEV018049NR

Table of Contents

Related product manuals