Maintenance
668
Light bulbs
Replacing liftgate room lamp bulb
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
stra
ight out.
3.
Install a new bulb in the socket.
4. Align the lens cover tabs with the
la
mp hou
sing notches and snap
the lens into place.
If the Liftgate room lamp (LED) does
n
o
t operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamps cannot be replaced
as
a
single component because they
are part of an integrated unit. The
LED lamps have to be replaced with
the unit.
A skilled technician should check or
re
p
air the Liftgate room lamp (LED),
for it may damage related parts of
the vehicle.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
To Next Page
Loading...
