Electric Vehicle Guide
521
Driving Electric Vehicle
If the same problem occurs when
charging the vehicle with a well-
functioning AC charger or genuine
Kia portable charger, have your
vehicle inspected by an authorized
Kia dealer.
Charging Stopped. Check the Cable
Connection
This warning message is displayed
for the reasons below:
䳜 The
charging connector is not
c
orrectly connected to the
charging inlet.
䳜 The char
ging c
onnector lock
release button is pressed.
If this occurs, separate the charging
connector and r
e-connect it.
Check whether there is any problem
(ex
t
ernal damage, foreign sub
-
stances, etc.) with the charging con
-
nector and charging inlet.
If the same problem occurs when
chargi
ng the vehicle with a replaced
charging cable or genuine Kia porta
-
ble charger, we recommend that
you have your vehicle inspected by
an authorized Kia dealer.
12 V Aux. Battery Saver+
The Aux. Battery Saver+ is a func
-
tion that monitors the charging sta
-
tus of the 12 V auxiliary battery.
If the auxiliary battery le
vel is low,
the main high voltage battery
charges the auxiliary battery.
The Aux. Battery Saver+ function
wi
ll
be ON when the vehicle is deliv
-
ered. If the function is not needed,
you may turn it off in the Users
Settings mode on the cluster.
Mode
Cycle Mode
When the POWER button is in the
OFF position with all doors, hood
and liftgate closed, the Aux. Battery
Saver+ activates.
Automatic Mode
When the POWER button is in the
ON position with the charging con
-
nector plugged in, the function acti
-
vates to prevent overdischarge of
the auxiliary battery.
* The Aux. Battery Saver+ activates
maximum of
20 minutes. If the
Aux. Battery Saver+ function acti
-
vates more than 10 times consec
-
utively when in the automatic
mode, the function will stop acti
-
vating, judging that there is a
To Next Page
Loading...
