Safety features of your vehicle
164
Seat
䳜 To reinstall the headrest, put the
headrest poles (3) into the holes
while pressing the release button
(1).
䳜 The
n adjust it to the appropriate
he
ight and ensure that it locks in
position.
Armrest (if equipped)
To use the armrest, pull it forward
from the seatback.
Folding the rear seat
The rear seatbacks may be folded
to facilitate carrying long items or
to increase the luggage capacity of
the vehicle.
Folded Seatback
The purpose of the fold-down rear
seatbacks is to allow you to carry
longer objects that could not other
-
wise be accommodated.
䳜 Never allow a passenger to sit on
top of the folde
d down seatback
while the car is moving. This is not
a proper seating position since no
seat belts are available for use.
䳜 To reduce the risk of injury caused
by sli
ding cargo within the pas
-
senger compartment of the vehi
-
cle, objects carried on the folded
down seatback should not extend
higher than the top of the front
seats.
To fold down the rear seatback
1. Set the front seatback to the
upright position and if necessary,
slide the front seat forward.
2. Lower the rear headrests to the
lowest positi
on as above the pic
-
ture.
Objects
Objects carried on the folded down
seatback should not extend higher
than the top of the front seatbacks.
This could allow cargo to slide for
-
ward and cause injury or damage
during sudden stops.
To Next Page
Loading...
