EasyManua.ls Logo

Kia 2020 Telluride - Replacing Smart Key Battery

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
4
4
Features of your vehicleSmart key
NOTICE
To prevent the electronic key from
becoming damaged by magnetic
fields, do not leave it near the fol
-
lowing electrical appliances:
󳱽TVs
󳱽Personal computers
󳱽Cellular phones, cordless phones
and battery chargers
󳱽Table lamps
󳱽Induction cookers
NOTICE
If you have to leave the vehicle's key
with a parking attendant, remove
the mechanical key for your own
use and provide the attendant with
the electronic key only.
NOTICE
When bringing a key with wireless
remote control function onto an air
-
plane, make sure you do not press
any button on the key while inside
the cabin. If you are carrying the key
in your bag etc., make sure that the
buttons cannot be pressed acciden
-
tally. If you press a button, the key
may emit radio waves that could
interfere with the operation of the
aircraft.
Replacing smart key battery
A smart key battery should last for
several years, but if the smart key is
not working properly, try replacing
the battery with a new one.
If you are unsure how to use your
smart key or replace the battery,
contact an authorized Kia dealer.
1.Remove the mechanical key.
2.Pry open the rear cover.
3.Replace the battery with a new
battery (CR2032). When replac
-
ing the battery, make sure the
battery is in the correct position.
4.Install the battery in the reverse
order of removal.
The smart key is designed to give
you years of trouble-free use, how
-
ever, it can malfunction if exposed
to moisture or static electricity. If
you are unsure how to use or
replace the battery, contact an
authorized Kia dealer.
Using the wrong battery can cause
the smart key to malfunction. Be
sure to use the correct battery.
OSK3048402NR
on_en_us.book Page 11 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals