Features of your vehicle
304
Power liftgate
In cold and wet climates, the
power liftgate may not work
properly due to freezing condi
-
tions.
It is recommended to wait until
the power liftgate is fully closed
before starting the vehicle. The
power liftgate may not close fully
if the vehicle is started during
automatic closing.
CAUTION
Never operate the power lift gate
with any heavy objects attached
(e.g. bicycles) as it could become
damaged.
Automatic reversal
During power opening and closing if
the power liftgate is blocked by an
object or part of the body, the
power liftgate will detect the resis
-
tance.
If the resistance is detected while
opening the liftgate, it will stop
and move in the opposite direc
-
tion.
If the resistance is detected while
closing the liftgate, it will stop and
move in the opposite direction.
However, if the resistance is weak
such as from an object that is thin
or soft, or the liftgate is near the
latched position, the automatic stop
and reversal may not detect the
resistance.
If the automatic reversal feature
operates continuously more than
twice during opening or closing
operation, the power liftgate may
stop at that position. At this time,
close the liftgate manually and
operate the liftgate automatically
again.
WARNING
Never place any object or part of
your body in the path of the power
liftgate as it is operating. Doing so
could result in personal injury.
Setting the speed of opening/clos
-
ing of power liftgate
You can adjust the speed by your
-
self.
How to set the speed
Select 'Door' → 'Power liftgate
speed' → 'Fast/Normal' on the
user settings of the instrument
cluster.
To Next Page
Loading...
