EasyManua.ls Logo

Kia 2020 Telluride - Resetting the Power Liftgate; Setting the Opening Height of the Power Liftgate

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
4
4
Features of your vehiclePower liftgate
󳱽You cannot change the speed
when the power liftgate func
-
tion is turned off or the liftgate
is not completely closed.
󳱽The power liftgate speed is ini
-
tially set as 'fast'.
Please refer to "User Settings
mode" on page 4-71.
NOTICE
If the power liftgate does not oper
-
ate normally, check again if the gear
position is in P (Park) position.
Resetting the power liftgate
If the battery has been discharged
or disconnected, or if the related
fuse has been replaced or discon
-
nected, the power liftgate may not
work properly. For the power lift
-
gate to operate normally, reset the
power liftgate as follows:
1.Put the automatic shift lever in P
(Park).
2.While pressing the liftgate close
button, press the liftgate handle
switch for more than 3 seconds.
(the chime will sound)
3.Close the liftgate manually.
If the power liftgate does not work
properly after the above procedure,
have the system checked by an
authorized Kia dealer.
NOTICE
If the power liftgate does not oper
-
ate normally, first check the follow
-
ing condition before using the power
liftgate.
Make sure the automatic shift lever
is in P (Park).
Setting the opening height of the
power liftgate
The driver may set the height of a
fully opened liftgate by following
the below instruction.
OON049437NR
OON048060NR
on_en_us.book Page 31 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals