Kia 2020 Telluride - Closing the Fuel Filler Lid

43
4
4
Features of your vehicleFuel filler lid
3.Pull the fuel filler lid (1) out to
fully open.
4.To remove the fuel tank cap (2),
turn it counterclockwise. You may
hear a hissing noise as the pres
-
sure inside the tank equalizes.
5.Place the cap on the fuel filler lid.
Closing the fuel filler lid
1.To install the cap, turn it clockwise
until it "clicks" one time. This indi
-
cates that the cap is securely
tightened.
2.Close the fuel filler lid and push on
it lightly gently to make sure that
it is securely closed.
WARNING
Refueling
Always remove the fuel cap care
-
fully and slowly. If the cap is venting
fuel or if you hear a hissing sound,
wait until the condition stops before
completely removing the cap.
If pressurized fuel sprays out, it can
cover your clothes or skin and sub
-
ject you to the risk of fire and burns.
NOTICE
When refueling on unlevel ground,
the fuel gauge may not point to the
F position. It is not a malfunction. If
you move your vehicle to a level
ground, the fuel gauge will move to
the full position.
NOTICE
Tighten the cap until it clicks one
time, otherwise, the engine warn
-
ing indicator light will illuminate.
Always check that the fuel cap is
installed securely to prevent fuel
spillage in the event of an accident.
WARNING
Fire/explosion risk
Read and follow all warnings posted
at the gas station facility. Failure to
follow all warnings will result in
severe personal injury, severe burns
or death due to fire or explosion.
WARNING
Static electricity
󳱽Before touching the fuel nozzle,
you should eliminate potentially
dangerous static electricity dis
-
charge by touching another metal
part of the vehicle, a safe distance
away from the fuel filler neck,
nozzle, or other gas source.
OON048076NR
on_en_us.book Page 43 Thursday, January 31, 2019 2:23 PM