Kia 2020 Telluride - Indicator Lights; ESC off Button

93
4
4
Features of your vehicleWarning and indicator lights
All Wheel Drive (AWD) warning light
(if equipped)
This warning light illuminates:
󳱽Once you set the ENGINE START/
STOP button to the ON position.
-It illuminates for approximately
3 seconds and then goes off.
󳱽When there is a malfunction with
the AWD.
In this case, have your vehicle
inspected by an authorized Kia
dealer.
Indicator lights
The indicator light indicates
whether the various functions are
activated.
Electronic Stability Control (ESC)
indicator light
This indicator light illuminates:
󳱽Once you set the ENGINE START/
STOP button to the ON position.
-It illuminates for approximately
3 seconds and then goes off.
󳱽When there is a malfunction with
the ESC.
In this case, have your vehicle
inspected by an authorized Kia
dealer.
This indicator light blinks:
While the ESC is operating.
* For more details, refer to "Elec
-
tronic Stability Control (ESC) sys -
tem" on page 5-38.
Electronic Stability Control (ESC)
OFF indicator light
This indicator light illuminates:
󳱽Once you set the ENGINE START/
STOP button to the ON position.
-It illuminates for approximately
3 seconds and then goes off.
󳱽When you deactivate the ESC
system by pressing the ESC OFF
button.
* For more details, refer to "Elec
-
tronic Stability Control (ESC) sys -
tem" on page 5-38.
Immobilizer indicator light
This indicator light illuminates for
up to 30 seconds:
󳱽When the vehicle detects the
smart key in the vehicle properly
while the ENGINE START/STOP
button is ACC or ON.
-At this time, you can start the
engine.
-The indicator light goes off
after starting the engine.
This indicator light blinks for a few
seconds:
󳱽When the smart key is not in the
vehicle.
on_en_us.book Page 93 Thursday, January 31, 2019 2:23 PM