Features of your vehicle
1144
Lighting
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
The fog lights will turn on when the
fog light switch (1) is turned to the
on position after the headlight is
turned on.
To turn off the fog lights:
Turn the fog light switch (1) to
the OFF position.
High Beam Assist (HBA) system (if
equipped)
The High Beam Assist (HBA) is a
system that automatically adjusts
the headlamp range (switches
between high beam and low beam)
according to the brightness of other
vehicles and road conditions.
Operating the HBA
The HBA can be operated using the
light switch.
1.Place the light switch in the AUTO
position.
2.Turn on the high beam by pushing
the lever away from you.
3.The HBA () indicator will illu
-
minate.
4.The HBA will turn on when vehicle
speed is above 25 mph (40 km/h).
The details of operation with the
light switch while the HBA is on are
below.
If the light switch is pushed away,
the HBA will turn off and the high
beam will be on continuously.
If the light switch is pulled
towards you when the high beam
is off, the high beam will be on
without canceling the operation
of the HBA. (When you take your
hands off the switch, the lever will
move to the middle and the high
beam will turn off.)
To Next Page
Loading...
