EasyManua.ls Logo

Kia 2020 Telluride - Defogging Logic; Defrosting Outside Windshield with Automatic Climate Control

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
153
4
4
Features of your vehicleWindshield defrosting and defogging
Defrosting outside windshield with
automatic climate control
1.Set the fan speed to the highest
position.
2.Set the temperature to the
extreme hot (HI) position.
3.Press the defroster button ().
The outside (fresh) air position
will be selected automatically and
the air conditioning will turn on
according to the detected ambi
-
ent temperature.
Defogging logic (if equipped)
To reduce the possibility of fogging
up the inside of the windshield, the
air intake or air conditioning is con
-
trolled automatically according to
certain conditions such as or
position.
To cancel automatic defogging logic
or return to the automatic defog
-
ging logic, do the following.
Canceling/returning automatic
defogging logic on manual climate
control system
1.Turn the Engine Start/Stop to the
ON position.
2.Turn the mode selection knob to
the defrost position ().
3.Push the air intake control button
at least 5 times within 3 seconds.
The indicator light in the air intake
control button will blink 3 times. It
indicates that the defogging logic
is canceled or returned to the
programmed status.
If the battery has been discharged
or disconnected, it resets to the
defog logic status.
OON048332NR
OON048333NR
on_en_us.book Page 153 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals