Kia 2020 Telluride - Deactivating the ISG; ISG Malfunction; Operating Conditions

47
5
5
Driving your vehicleIdle Stop and Go (ISG) system
󳱽If you unfasten the seat belt or
open the driver's door while
depressing the brake pedal.
Operating conditions
The ISG will operate under the fol -
lowing condition:
󳱽The driver's seat belt is fastened.
󳱽The driver's door and engine hood
are closed.
󳱽The brake vacuum pressure is
adequate.
󳱽The battery is sufficiently
charged.
󳱽The outside temperature is
between 14 󳚛F to 95 󳚛F (-10 󳚛C to
35 󳚛C).
󳱽The engine coolant temperature
is not too low.
NOTICE
󳱽If the ISG system does not meet
the operation condition, the ISG
system is deactivated. The light
on the ISG OFF button will illumi
-
nate and a message "Auto Stop
conditions not met" will appear on
the LCD display.
󳱽If the light or warning message
comes on continuously, please
check the operation condition.
Deactivating the ISG
󳱽If you wish to deactivate the ISG,
press the ISG OFF button. The
light on the ISG OFF button will
illuminate.
󳱽If you press the ISG OFF button
again, the ISG will be activated
and the light on the ISG OFF but
-
ton will turn off.
ISG malfunction
The ISG may not operate when:
The ISG may not operate when an
ISG related sensor or system error
occurs.
The following will happen:
OON058136NR
OON058132NR
on_en_us.book Page 47 Thursday, January 31, 2019 2:23 PM