Kia 2020 Telluride - Adjusting the Sensitivity of the SCC; SCC Switch

73
5
5
Driving your vehicleSmart Cruise Control (SCC) with Stop & Go
system
󳱽Always pay continuous attention
to road and driving conditions
even when the Smart Cruise Con
-
trol system is being operated.
SCC switch
The SCC switch has the following
functions.
󳱽CANCEL: Cancels cruise control
operation.
󳱽CRUISE: Turns cruise control sys
-
tem on or off.
󳱽RES+: Resumes or increases
cruise control speed.
󳱽SET-: Sets or decreases cruise
control speed.
󳱽: Sets vehicle-to-vehicle dis
-
tance
Adjusting the sensitivity of the SCC
The sensitivity of vehicle speed
when following the front vehicle to
maintain the set distance can be
adjusted.
1.Press the MODE button () sev
-
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
2.Select 'Driver Assistance → SCC
response' with the MOVE switch
( / ) and the OK button on
the steering wheel.
3.Select one of the following
options:
󳱽Fast: Vehicle speed to the vehi
-
cle ahead to maintain the set
distance is faster than normal
speed.
󳱽Normal: Vehicle speed to the
vehicle ahead to maintain the
set distance is normal.
󳱽Slow: Vehicle speed to the vehi
-
cle ahead to maintain the set
distance is slower than normal
speed.
NOTICE
The last selected speed sensitivity
of the smart cruise control is
remained in the system.
OON058034NR
on_en_us.book Page 73 Thursday, January 31, 2019 2:23 PM