Kia 2020 Telluride - Accelerating Temporarily with the SCC on; Decreasing the SCC Set Speed; SCC will be Temporarily Canceled When

Driving your vehicle
765
Smart Cruise Control (SCC) with Stop & Go
system
CAUTION
Check the traffic and driving condi -
tions before using the toggle switch.
Driving speed may sharply increase,
when you push up and hold the tog
-
gle switch.
Decreasing the SCC set speed
Follow either of these procedures:
󳱽Move the lever down (to SET-),
and hold it. Your vehicle set speed
will decrease by 5 mph (10 km/h).
Release the lever at the speed
you want.
󳱽Move the lever down (to SET-),
and release it immediately. The
cruising speed will decrease by 1.0
mph (1.0 km/h) each time you
move the lever down (to SET-) in
this manner.
You can set the cruise control speed
above 20 mph (30 km/h).
Accelerating temporarily with the
SCC on
󳱽If you want to speed up tempo -
rarily when the cruise control is
on, depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
󳱽To return to the set speed, take
your foot off the accelerator.
󳱽If you move the lever down (to
SET-) at increased speed, the
cruising speed will be set again.
NOTICE
Be careful when accelerating tem -
porarily, because the speed is not
controlled automatically at this time
even if there is a vehicle in front of
you.
SCC will be temporarily canceled
when:
You are able to temporarily cancel
the SCC. In some circumstances, the
SCC will cancel automatically.
OON058030NR
on_en_us.book Page 76 Thursday, January 31, 2019 2:23 PM