EasyManua.ls Logo

Kia 2020 Telluride - Resuming the SCC Set Speed

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving your vehicle
785
Smart Cruise Control (SCC) with Stop & Go
system
tance on the LCD display will go
off.
In a condition the Smart Cruise Con
-
trol is cancelled automatically, the
Smart Cruise Control will not resume
even though the RES+ or SET- tog
-
gle switch is moved.
NOTICE
If the Smart Cruise Control is can
-
celed during a situation is that is not
described above, take your vehicle
to an authorized Kia dealer and have
the system checked.
NOTICE
If the system is automatically can
-
celed, the warning chime will sound
and a message will appear for a few
seconds.
You must adjust the vehicle speed
by depressing the accelerator or
brake pedal according to the road
condition and driving conditions.
Always check the road conditions.
Do not rely on the warning chime.
Resuming the SCC set speed
󳱽If any method other than the
"RES+" or "SET-" lever was used
to cancel cruising speed and the
system is still activated, the
cruising speed will automatically
resume when you push the lever
up (RES+) or down (SET-).
󳱽If you push the lever up (RES+),
the speed will resume to the
recently set speed. However, if
vehicle speed drops below 5 mph
(10 km/h), it will resume when
there is a vehicle in front of your
vehicle.
NOTICE
Always check the road conditions
when you push the toggle switch up
(RES+) to resume speed.
OON058122NR
OON058031NR
on_en_us.book Page 78 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals