Kia 2020 Telluride - Limitations of the SCC; SCC Malfunction Message

83
5
5
Driving your vehicleSmart Cruise Control (SCC) with Stop & Go
system
SCC malfunction message
The message will appear when the
vehicle to vehicle distance control
system is not functioning normally.
In this case, take your vehicle to an
authorized Kia dealer and have the
system checked.
CAUTION
󳱽Do not apply foreign objects such
as a bumper sticker or a bumper
guard near the radar sensor.
Doing so may adversely affect the
sensing performance of the radar.
󳱽Always keep the radar sensor and
lens cover clean and free of dirt
and debris.
󳱽Use only a soft cloth to wash the
vehicle. Do not spray pressurized
water directly on the sensor or
sensor cover.
󳱽Be careful not to apply unneces
-
sary force on the radar sensor or
sensor cover. If the sensor is forc
-
ibly moved out of proper align -
ment, the Smart Cruise Control
system may not operate cor
-
rectly. In this case, a warning
message may not be displayed.
Have the vehicle inspected by an
authorized Kia dealer.
󳱽If the front bumper becomes
damaged in the area around the
radar sensor, the Smart Cruise
Control system may not operate
properly. If this occurs, take your
vehicle to an authorized Kia dealer
and have the system checked.
󳱽Use only a genuine Kia sensor
cover for your vehicle. Do not
paint anything on the sensor
cover.
Limitations of the SCC
The SCC may have limits to its abil -
ity to detect distance to the vehicle
ahead due to road and traffic condi
-
tions.
Driving on a curve
OON058089NR
OON058019NR
on_en_us.book Page 83 Thursday, January 31, 2019 2:23 PM