EasyManua.ls Logo

Kia 2020 Telluride - Activating;Deactivating the LFA; Steering Assist

Kia 2020 Telluride
579 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
91
5
5
Driving your vehicleLane Following Assist (LFA) system
󳱽Keeping your hands off the wheel
while driving will trigger the
hands-off warning and deactivate
the steering-assist system.
󳱽When driving at a high speed, the
steering assist force can become
weak and the vehicle can drive out
of its lane. Extra caution is
required, and comply with the
speed limit.
󳱽Attaching an object to the steer
-
ing wheel could deter steering
assistance.
󳱽Attaching an object to the steer
-
ing wheel could deter the hands-
off alarming system.
Activating/deactivating the LFA
To activate/deactivate the LFA, with
the ENGINE START/STOP button in
the ON position, take the following
steps:
1.Press the MODE button () sev
-
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
2.Select 'Driver Assistance Driv
-
ing assist LFA (Lane Following
Assist)' with the MOVE switch (
/ ) and the OK button on the
steering wheel.
The set-up of the LFA system will
be maintained, as selected, when
the vehicle is restarted.
Operating conditions
The system is activated when the
Lane Following Assist is selected
from the User settings menu when
the following conditions are satis
-
fied:
󳱽When SCC is in operation (Vehicle
deceleration and acceleration
control)
Refer to "Smart Cruise Control
(SCC) with Stop & Go system" on
page 5-71.
󳱽Vehicle speed is lower than 95
mph (153 km/h).
Once the LFA starts working, the
indicator light () comes on the
instrument panel.
The indicator light colors according
to the LFA status are as follows.
󳱽Green: steering assist mode on
󳱽White: steering assist mode off
Steering assist
If the vehicle is inside the lane with
both lanes detected by the LFA, and
there is no steep steering made by
the driver, the LFA changes into
steering assist mode.
The indicator light will come on
green, and the LFA helps the vehicle
stay in line by providing steering
inputs.
When steering inputs are not being
provided, the indicator light will
flash green and changes to white.
on_en_us.book Page 91 Thursday, January 31, 2019 2:23 PM

Table of Contents

Related product manuals